Canon EOS 6D, Инструкция по эксплуатации

Страница: 165 / 406

165
Although using the self-timer or Remote Switch can prevent camera
shake, using mirror lockup to prevent camera vibrations (mirror shock)
can also help when you use a super telephoto lens or shoot close ups
(macro photography).
1
Set [Mirror lockup] to [Enable].

Under the [
z
2 ] tab, select [ Mirror lockup ], then press <
0
>.

Select [ Enable ], then press <
0
>.
2
Focus the subject, then press the shutter button
completely.
X The mirror will swing up.
3
Press the shutter button completely again.
X The picture is taken and the mirror goes back down.
2
Mirror Lockup
N

In very bright light such as at the beach or a ski slope on a sunny day,
take the picture promptly after mirror lockup.

Do not point the camera toward the sun. The sun’s heat can scorch and
damage the shutter curtains.

If you use the self-timer and bulb exposure in combination with a mirror lockup,
keep pressing the shutter button completely (self-timer delay time + bulb
exposure time). If you let go of the shutter button during the self-timer
countdown, there will be a shutter-release sound, but no picture will be taken.

During mirror lockup, shooting function settings and menu operations,
etc. are disabled.

Even if the drive mode is set to continuous shooting, only one shot can
be taken.

You can also use the self-timer with mirror lockup.

If 30 seconds elapse after the mirror has locked up, it will go back down
automatically. Pressing the shutter button completely again locks up the
mirror again.

For mirror lockup, using a tripod and Remote Switch RS-80N3 (sold
separately) or Timer Remote Controller TC-80N3 (sold separately) is
recommended (p.167).

You can also use a remote controller (sold separately, p.167). Setting the
remote controller to a 2-sec. delay is recommended.