Canon EOS 6D, Инструкция по эксплуатации

Страница: 195 / 406

195
Using AF to Focus (AF Method)
AF Operation

Focusing will take slightly longer.

Even when focus has been achieved, pressing the shutter button
halfway will focus again.

The image brightness may change during and after the AF
operation.

If the light source changes while the Live View image is displayed,
the screen may flicker and focusing may be difficult. If this happens,
exit Live View shooting and autofocus under the actual light source.

If you press the <
u
> button in the FlexiZone - Single, the image will
be magnified at the AF point. If focusing is difficult in the magnified
view, return to the normal view and autofocus. Note that the AF
speed may differ between the normal and magnified views.

If you magnify the view after focusing with FlexiZone - Single in the
normal view, it may not look focused.

In the
u
Live mode, pressing the <
u
> button will not magnify the
image.
FlexiZone - Single and
u
(Face Detection) Live Mode Notes

In the FlexiZone - Single or
u
(face detection) Live mode, if you shoot a
peripheral subject and it is slightly out of focus, aim the center AF point
over the subject to focus, then take the picture.

The external Speedlite will not emit the AF-assist beam. However, if an
EX-series Speedlite (sold separately) equipped with an LED light is used,
the LED light will turn on automatically for AF-assist when necessary in
the FlexiZone - Single and
u
(face detection) Live mode.