Canon EOS 6D Mark II, Инструкция по эксплуатации

Страница: 403 / 610

403
t
Filtering Images for Playback
3
Implement the search conditions.
Read the message that appears.
Select [ OK ], then press <
0
>.
X The search condition is specified.
4
Display the found images.
Press the <
3
> button to play back
images.
X Only the images that match the set
conditions (filtered) will be played back.
X When the images are filtered, the
screen will have an outer yellow frame.
Display the screen in step 2, then press the <
L
> button to remove all
the checkmarks [ X ]. Press the <
0
> button, then select [ OK ] to clear
the search conditions.
Yellow frame
Clearing the Search Conditions
If there are no images matching the search conditions, pressing <
0
> on
the screen in step 2 will not enable [ OK ]. (Cannot proceed to step 3.)
Even if [
5
2: Auto power off ] is set to [ 1 min. ], [ 2 min. ], or [ 4 min. ], the
auto power off time will be approx. 6 min. when the [
3
2: Set image
search conditions ] screen is displayed.
Doing any of the following will clear the search conditions, and the filtered
display will end. ([
Image search canceled ] may also appear on the screen.)
• Shooting is performed.
• Auto power off takes effect.
• Setting the power switch to <
2
>.
• Formatting the card.
• Opening the battery compartment cover or card slot cover.
• Adding an image (processing a RAW image, resizing an image,
cropping an image, etc.).
• When there are no longer any images matching the search conditions.
• All the camera settings are cleared.