Canon EOS 6D Mark II, Инструкция по эксплуатации

Страница: 304 / 610

304
3
Menu Function Settings
• Disable
Be sure to set it to [ Disable ] if you use a TS-E lens (other than
those listed in ) for shifting or tilting the lens or if you use an
extension tube. If [ Mode 1 ] or [ Mode 2 ] is set, the standard
exposure may not be obtained, or an irregular exposure may
result.
With [ Mode 2 ] set, continuous shooting will not work even if you set the
drive mode to <
o
> or <
i
>.
If you use flash with the flash mode set to E-TTL II/E-TTL autoflash,
shutter release will be performed by the same internal operation
mechanism as with viewfinder shooting. Therefore, shooting while
suppressing the mechanical sound will not be possible (regardless of the
[
Silent LV shoot. ] setting).
When using a non-Canon flash unit, set it to [ Disable ]. The flash will not
be fired if it is set to [ Mode 1 ] or [ Mode 2 ].
If [ Mode 2 ] is set and you use a remote controller (p.271), the operation
will be the same as with [ Mode 1 ].
Selecting [
z
3: Dust delete data ] or either [ Clean manually ] or [ Clean
now
f
] under [
5
4: Sensor cleaning ] will stop the Live View shooting.
To start Live View shooting again, press the <
0
> button.
With the TS-E17mm f/4L or TS-E24mm f/3.5L II lens, you can use [ Mode 1 ]
or [ Mode 2 ].