Canon EOS 6D Mark II, Инструкция по эксплуатации

Страница: 261 / 610

261
P
Multiple Exposures
N
For multiple-exposure shooting, the settings will be automatically
switched to [
Disable ] for the following: all the items of [
z
1: Lens
aberration correction ], [
z
2: Auto Lighting Optimizer ], and [
z
3:
Highlight tone priority ].
If [
z
3: Picture Style ] is set to [ Auto ], [ Standard ] will be applied for
shooting.
With [ Additive ] set, the noise, irregular colors, banding, etc. of the image
displayed during shooting may look different from the multiple-exposure
image recorded in the end.
With multiple exposures, the more exposures there are, the more
noticeable the noise, irregular colors, and banding will be.
If [ Additive ] is set, the image processing after taking the multiple
exposures will take time. (The access lamp will light up longer.)
If you perform Live View shooting with [ Additive ] set, the Live View
function will stop automatically when the multiple-exposure shooting
ends.
If the number of multiple exposures is less than the number of
continuous shots set with <
q
> (Self-timer: Continuous), the multiple
exposure shooting will end after the number of exposures set with [ No.
of exposures ] is taken.
In step 7, the brightness and noise of the multiple-exposure image
displayed during Live View shooting will be different from those of the
final multiple-exposure image recorded.
Doing any of the following will cancel the multiple-exposure shooting:
Setting the power switch to <
2
>, replacing the battery, replacing the
card, or switching to movie shooting.
During multiple-exposure shooting, [ Clean now
f
] or [ Clean
manually ] under [
5
4: Sensor cleaning ] cannot be selected.
While shooting, if you switch to a Basic Zone mode or to <
w
> or <
x
>,
the multiple-exposure shooting will end.
If you connect the camera to a computer, multiple-exposure shooting will
not be possible. If you connect the camera to a computer during
shooting, multiple-exposure shooting will end.