Canon DP-V2410 Скачать руководство пользователя страница 86

Страница: 86 / 96

Troubleshooting

Symptom

Cause and Action

OSD menu cannot be used.

• Check that "Protect Settings" is not set.

"Aspect Marker", " Safety Zone Marker " or
"Area Marker" does not appear.

• A channel with no signal, unsupported signal, or with "Input

Configuration" not set may be selected. Check the signal.

The fan starts to rotate even when "Fan"
under "Camera Link" is set to "On" or
"Fan Stop" is set to "On".

• The fan stays off for approx. 1 minute when an AC power supply is used.

To keep the fan off for a longer period, use a DC power supply.

• When "Fan" under "Camera Link" is set to "On", the down time may not

match the camera.

The fan does not stop even when "Fan"
under "Camera Link" is set to "On" or
"Fan Stop" is set to "On".

• The fan does not stop if the internal temperature of the video display is

high. Configure settings after the internal temperature has lowered.

• The fan may not stop in some conditions, for example when used at a

high temperature. Use the video display at the operating temperature
(

66) or lower.

You forgot the password for "Protect
Settings".

• Press the jog dial and the button while the video display is in standby.

The configuration will be reset to the state where no password is set.

The video display does not start up in the
condition that the power was turned off
last time.

• Check the "Power on Setting" on the OSD menu. Set "Last memory"

to start up the video display in the condition that the power is turned off
last time.

Содержание DP-V2410

































































































Результаты поиска

Содержание DP-V2410

Отзывы:

Похожие инструкции для DP-V2410

Бренды по названию

Популярные бренды

Canon DP-V2410, Инструкция по эксплуатации

Результаты поиска

Содержание DP-V2410

Отзывы:

Похожие инструкции для DP-V2410

Бренды по названию

Популярные бренды