Canon DP-V2410 Скачать руководство пользователя страница 63 | Manualshive

Страница: 63 / 96

background image

63

OSD Menu

Item

Setting Options (underline indicates factory default)

Protect Settings

Locks the settings so they cannot be changed. When you press the MENU button, "Signal/System
Information" appears, but other operations are grayed out because they are locked.

Password

Set a password to protect settings. Use a four-digit number (0000 to 9999).

Protect Target

Selects the target to be protected.

Picture Mode

: Select "On" to protect or "Off" to exclude settings for "Picture Mode".

On, Off

Select Channel

: Select "On" to protect or "Off" to exclude settings for "Select Channel".

On, Off

Protect

Select "OK" to protect. When a password has been set, enter the password and select "OK".

• Unlocking Protect Settings
Move the selection frame to "Protect Settings" and press the SET button for approximately
3 seconds. When a password has been set, enter the password and select "OK".

Fan Settings

Sets the operation of internal fan.

Fan Control

Makes the fan rotate faster before stopping in order to prevent the internal temperature from
increasing, when the fan is stopped manually.

On, Off

Fan Stop

The fan can be stopped manually when "Fan Control" is set to "On". The fan noise can be made
silent when the video display is used during shooting or when silence is necessary.

On, Off

Note

• If the message "Invalid operation due to high temperature." is displayed, the fan cannot be

stopped even when "On" is selected for this item. Wait until the internal temperature lowers.

• At a room temperature (25 ˚C), the fan remains off for approximately one minute when the AC

power supply is used and ten minutes when the DC power supply is used. Select the type of
power supply according to the purposes.

• If the temperature inside the main unit increases while the fan is off, the message "Fan will be

rotated as the temperature is high." is displayed and the fan starts rotating approximately ten
seconds later. Since the temperature of the main unit has increased, the fan rotates faster than
usual.

• Select "Off" to restart the fan. The fan rotates faster than usual.
• The fan may not stop in some conditions, for example when used at a high temperature.

«
...
61
62
63
64
65
...
»

Содержание DP-V2410

































































































Отзывы:

Нет отзывов

Похожие инструкции для DP-V2410

Бренд: Acer Страницы: 2

Бренд: Spektrum Страницы: 12

Бренд: Edge10 Страницы: 1

ProSeries 1 VS45130-0200

Бренд: Vitasigns Страницы: 28

Бренд: BIGSTONE Страницы: 14

Бренд: BenQ Страницы: 36

VisuNet GMP PC219

Бренд: Pepperl+Fuchs Страницы: 50

Бренд: AHA Страницы: 26

Бренд: I-Inc Страницы: 21

Бренд: Eizo Страницы: 57

Бренд: SHENZHEN PUMP MEDICAL SYSTEM Страницы: 21

UltraView iAP1500

Бренд: I-Tech Страницы: 1

UltraView iAP1900

Бренд: I-Tech Страницы: 1

Бренд: boso Страницы: 172

Observer HD+ AWS4388

Бренд: ALC Страницы: 38

Бренд: Eizo Страницы: 35

TUF Gaming VG27V Series

Бренд: Asus Страницы: 31

ROG Swift PG27V

Бренд: Asus Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды