5
5
5-8
5-8
Adjustment > Adjustment Method (DADF) > Adjusting the Trailing Edge Registration
Adjustment > Adjustment Method (DADF) > Adjusting the Trailing Edge Registration
Adjusting the Horizontal Registration
1) Place the test chart in the DADF, and make a copy.
2) Compare the copy against the Test Chart for the horizontal registration; as necessary,
make the following adjustments:
3) On the Service Mode screen, touch the following notations to bring up the Adjustment
screen:
(LV.1) COPIER > ADJUST > ADJ-XY
4) Press [ADJ-Y-DF] to highlight.
• if the image is displaced to the rear, decrease the setting.
• if the image is displaced to the front, increase the setting.
unit of adjustment: 0.1 mm
Feed direction
Feed direction
A
A
Image rear side of
test chart
Rear side of
printed image
Rear side of
printed image
Image rear side of
test chart
< If the image is displaced toward rear >
< If the image is displaced toward front >
F-5-12
Adjusting the Trailing Edge Registration
1) Place the Test Chart in the DADF, and make a copy.
2) Compare the copy against the Test Chart for the trailing edge registration; as necessary,
make the following adjustments:
3) On the Service Mode screen, touch the following notations to bring up the Adjustment
screen:
(LV.1) FEEDER > ADJUST
4) Press [DOCST] to highlight.
• if the image is displaced to the leading edge, decrease the setting.
• if the image is displaced to the trailing edge, increase the setting.
unit of adjustment: 0.1 mm
Feed direction
Feed direction
A
A
Leading edge of
printed image
Image leading edge of
test chart
Image leading edge of
test chart
Leading edge of
printed image
< If the image is displaced toward trailing edge > < If the image is displaced toward leading edge >
CAUTION:
After completion of this adjustment, check the perpendicularity. If the perpendicularity
is not within spec, adjust it again following the procedures mentioned in "Adjusting the
Perpendicularity" and later.
F-5-13
Содержание DADF-AG1
