Canon DADF-AG1, Руководство по обслуживанию

Страница: 21 / 68

2
2
2-11
2-11
Technology > Controls (DADF) > Detecting Jams > Jams
Technology > Controls (DADF) > Detecting Jams > Jams
■
Release Operation
When a document is read, the read roller 1 (lower driven rollers) are pressurized/released to
prevent the training edge of the document from swaying.
After separation of the document, the read roller 1 (lower driven rollers) are pressurized by
the Release motor (M2) during formation of a registration loop.
After lapse of the predetermined time since turning off of the document trailing edge
registration sensor, the Release motor is driven to release the read roller 1 (lower driven
rollers).
Read roller 1
Release motor HP sensor
Release motor
Read roller 1 (lower rollers)
M2 M2
F-2-20
F-2-21
Detecting Jams
■ Jams
This machine detects document jams using the sensors shown below.
Document jam check timings are stored in the ROM on the reader controller PCB to check
whether a jam has occurred according to presence/absence of a document at the relevant
sensor position.
When a jam occurs, the host machine stores its code.
Jam codes can be checked by outputting a jam error log report in the service mode of the
host machine.
SR11
SR3
SR2
SR1
SR6
SR5
SR4
F-2-22