8
Important Safety Instructions
■
Moving
CAUTION
• Before moving the printer, turn it off, remove the power plug from the power outlet, and disconnect
the interface cable. Otherwise, the power cord and other cables could be damaged, resulting in a fire or
electric shock.
• Before carrying the printer, detach the stacker.
• When carrying the printer, be sure to securely hold
the printer with both hands to avoid dropping the
printer. In addition, do not hold the printer by the
feeder lift tray or stacker, doing so may break the tray
or stacker, and cause the printer to drop. This may
lead to injury.
• Always hold the printer level and carry it slowly. If ink is spilled inside the printer while moving it, this
could cause a fire or serious electrical shock or damage the printer.
• Before moving or shipping the printer, be sure to execute [Moving The Printer] or [Shipping The Printer]
from the printer driver.
Moving or Shipping the printer without taking necessary measures could cause ink leak inside the
printer, resulting in a fire, electric shock, or printer failure.
■
Maintenance and Inspections
WARNING
• To avoid a fire hazard, occasionally disconnect the power cord from the printer and the power supply
and use a soft dry cloth to clean the cord connectors and the connection points. Leaving the cord
plugged in and not cleaned for a long period, especially in an area subject to dust, oil, and high humidity,
could cause the insulation material to deteriorate.
• When cleaning the printer, do not use a flammable solvent (alcohol, thinner, etc.). If a flammable solvent
is brought into contact with the parts inside the printer, a fire or electric shock could result.
• Check the power cord, power plug and AC adapter regularly. If the following conditions occur, contact
your place of purchase, as the condition may cause a fire:
-
There are burn marks on the power plug.
-
The blade on the power plug is deformed or broken.
