Assembling the Triangle boomerang
* Note that liquid glue may cause warping. We recommend using a stick glue.
* After gluing the parts together, place the boomerang on a flat surface with a book or similar object placed
on top. Store the boomerang under the same conditions. Always retune the boomerang before throwing it.
Fold each part up. Glue the wing surfaces together with surface A inserted between
surfaces B and C.
Attach wing 1 to wing 2.
As shown in the illustration, align the notches for each part, then
rotate the parts so that the grey triangles in the center align.
Attach wing 3. As shown in the illustration, align the notches for each part, then rotate the parts so that the orange triangles in the center align. This will form
a white triangle on the bottom surface. Complete assembly by gluing the wings in place while adjusting them to ensure that the colors beneath the triangles
are not visible.
Mate the notches.
Top surface
Bottom surface
Fit the notch on wing 3 to the notch on wing 1. Rotate
the parts until the orange-colored sections match.
Rotate the parts so that the colors match the illustration.
Finished!
Boomerang : Assembly Instructions
