69
Settings for camera date and time.
Current Date and Time
The date and time set in the camera are displayed.
Settings
It is possible to change the date and time setting method, time zone and daylight saving time set at initial setting.
[
S
ettings Method]
Select the date and time setting method.
[
S
et manually]
Set the desired date and time in [Date] and [Time].
Set the time in 24-hour format in <hour:minute:second> order.
[
S
ynchronize with NTP server]
Synchronize with the time of NTP server specified in the displayed [Set NTP Server Settings Automatically].
[
S
et NTP
S
erver
S
ettings Automatically]
Select one of the following setting methods:
[Disable]
Enter the IP address or host name of the NTP server in [NTP Server].
[Use DHCP]
The camera's time is synchronized with the time of the NTP server at the address acquired from the DHCP server.
The acquired NTP server address is displayed in [NTP Server (DHCP)].
In order to set this, change [System] > [Communication] > [Network] > [IPv4] > [IPv4 Address Settings Method] to
[Auto (DHCP)] (P. 52).
[Use DHCPv6]
The camera's time is synchronized with the time of the NTP server at the address acquired from the DHCPv6 server.
The acquired NTP server address is displayed in [NTP Server (DHCPv6)].
In order to set this, change [System] > [Communication] > [Network] > [IPv6] > [IPv6] to [Enable], then set [Auto
(DHCPv6)] to [Enable] (P. 53).
[Use DHCP/DHCPv6]
The camera's time is synchronized with the time of the NTP server at the address acquired from the DHCP server or
DHCPv6 server.
[System] > [System] > [Date and Time]
