Canon CR-N300 Скачать руководство пользователя

Страница: 40 / 119

– When [PTZ/IS] > [Digital Zoom] is set to [300x] and the zoom position is the digital zoom area.

– When [PTZ/IS] > [Digital Zoom] > [Digital Tele-Converter] is set to [3.0x] or [6.0x]

• When [AF frame size] is [AUTO], [AF mode] becomes [Continuous].

Manual Focus

Manual Focus makes the focus position move manually.

Note

• If a zoom operation is performed after focusing, the focus may shift.

• If the camera is left turned on, the focus may shift due to increase of the temperature of the lens and inside the camera body. Check the

focus again before shooting.

[Focus Mode]

Turning [AF] off switches to manual focus mode.

[Adjust Focus]

Click [Near] to move the focus position to the near side, and [Far] to move the focus position to the far side. Click and hold

the button to move continuously.

[MF

peed]

Selects the manual focus adjustment speed (amount of focus movement when [Near] or [Far] is clicked.).

[Touch Operation]

Specifies the action when clicking the video.

[Touch AF]

Focuses on the position clicked on the screen.

[Focus Guide]

The focus guide frame is displayed and is able to move the frame to the position clicked on the screen.

The focus guide frame visually displays the direction and amount of adjustment from the current focus position to the in-

focus position.

[Face Detection]

Displayed when [Focus Guide] is set by [Touch Operation].

When set to [On], if there are people's faces on the screen, the focus guide frame will be displayed around the eye of the

person judged to be the main subject.

When turned off or no faces in the screen, the focus guide frame can be moved to the clicked position.

Note

• The green focus guide indicates the focus range.

• When the [Iris (Aperture Value)] is set to [Auto], it may take a while for the response of the focus guide frame to stabilize after a zoom

operation.

• In the "Shooting conditions that are difficult to focus with autofocus" (P. 39), the focus guide frame may not be displayed correctly.

• The focus guide is not available if:

– [PTZ/IS] > [Digital Zoom] is set to [300x] and the zoom position is the digital zoom area.

Far Direction

Adjustment

Big

Far Direction

Adjustment

mall

Focus

Near Direction

Adjustment

mall

Near Direction

Adjustment

Big

Adjustment

information cannot

be detected

Содержание CR-N300
























































































































Результаты поиска

Содержание CR-N300

Отзывы:

Похожие инструкции для CR-N300

Бренды по названию

Популярные бренды

Canon CR-N300, Руководство по настройкам

Результаты поиска

Содержание CR-N300

Отзывы:

Похожие инструкции для CR-N300

Бренды по названию

Популярные бренды