Canon CR-N300, Руководство по настройкам

Страница: 61 / 119

61
Note
If [Name Server Address 1] cannot be used, make access to [Name Server Address 2]. However, it is assumed that [Name Server Address
2] set beforehand.
[ S et Name S erver Address Automatically]
Select the server for setting automatically the name server address.
When using DHCP, set [IPv4 Address Settings Method] to [Auto (DHCP)] (P. 59).
When using DHCPv6, set [IPv6] to [Enable] and [Auto (DHCPv6)] to [Enable] (P. 60).
[Name S erver Address (DHCP)]
When [Set Name Server Address Automatically] is set as [Use DHCP] or [Use DHCP/DHCPv6], the name server address
acquired from the DHCP Server will be displayed.
[Name S erver Address (DHCPv6)]
When [Set Name Server Address Automatically] is set as [Use DHCPv6] or [Use DHCP/DHCPv6], the name server address
acquired from the DHCPv6 Server will be displayed.
[Host Name]
The host name of the camera can be registered with alphanumeric characters to the name server.
[ S earch Domain]
When adding a domain name to the search domain list, enter the domain name and click [Add].
If a domain name is specified in the search domain list, it will be handled in the form of host name + domain name simply by
specifying the host name without the domain name in the specified server such as NTP and RTMP.
[ S earch Domain List]
Displays a list of domain names added in [Search Domain].
Queries are sent to the DNS Server in order from the top of the list of domain names.
With the or button on the right, the order of the domain names can be changed.
Select a domain name and click to delete the domain name.
mDNS
Settings for use of multicast DNS. When using mDNS, IP address and host name information of the camera is notified to
other hosts on the network.
[mDN S ]
Select whether to use mDNS.
For using NDI|HX as a communication protocol (P. 64), set [mDNS] to [Enable].