Canon CR-N300 страница 82 Скачать руководство пользователя

Страница: 82 / 119

This will save/restore all the camera settings.

Backup/Restore

Settings related to backup and restoring.

[Back Up

ettings]

All settings except date and time will be backed up. The administrator account and certificates used in SSL/TLS, including

private key will also be backed up.

[Restore

ettings]

Restores all settings, except date and time, from the backup file created with [Back Up Settings].

The administrator account, IP address and certificates used by SSL/TLS, including private key will also be restored.

After restoring, the camera will be rebooted.

[Encryption Password]

Able to set a password to use when backing up and restoring. This is the password for encrypting the backup data itself.

When restoring from encrypted backup data, enter the password set when backing up. Use at least two types of single-byte

alphanumeric characters, numbers, or symbols.

Note

The settings are not restored if the password set when backing up and the password set when restoring do not match.

[System] > [Maintenance] > [Backup/Restore]

Important

Do not turn off the power to the camera while performing [Back Up Settings] or [Restore Settings]. Turning off the camera at this stage
may result in disabling its ability to boot correctly.

Important

• Be aware that if restored from a backup file of another camera, problems such as duplicate addresses on the network or overwriting

with a different Administrator Password may cause problems such as being unable to connect to the camera.

• When restoring the settings, do not use a backup file created with a firmware version newer than that of the camera to restore.

Содержание CR-N300
























































































































Результаты поиска

Содержание CR-N300

Отзывы:

Похожие инструкции для CR-N300

Бренды по названию

Популярные бренды

Canon CR-N300, Руководство по настройкам

Результаты поиска

Содержание CR-N300

Отзывы:

Похожие инструкции для CR-N300

Бренды по названию

Популярные бренды