Canon CR-N300 страница 116 Скачать руководство пользователя

Страница: 116 / 119

116

Although [AutoIP] is enabled by factory default settings, it is recommended to disable [AutoIP] when the initial setting of the

network is completed so that it will not be used for unauthorized purposes.

mDN

(multicast Domain Name

ystem)

[mDNS] (P. 61) is a function to notify devices on the network of the camera IP address and host name information

simultaneously so that the camera can be detected even in an environment without a DNS server.

In the factory default settings, the setting of [mDNS] is enabled, but to prevent unauthorized use by third parties, disable it

after the initial network settings are completed.

Wireless LAN

[Wireless LAN] (P. 62) allows users to access and operate the camera directly.

If it is unnecessary to connect the camera to a computer or mobile device using a Wireless LAN, set [Wireless LAN] to

[Disable].

RTP (Real-time Transport Protocol)

By using [RTP Server] (P. 57), video and audio data can be delivered to the specified multicast address. It is recommended

to set [RTP] to [Disable] when the devices connecting to the camera do not require RTP protocol.

tandard Communication (IP), NDI|HX, RTMP

When using [Standard Communication (IP)] (P. 64), [NDI|HX] (P. 64), and [RTMP] (P. 65), it is possible to distribute videos

using each protocol or operate the camera.

If it is unnecessary to connect the camera to a device using these protocols, set each item to [Disable].

Precautions When Disposing the Camera

When disposing the camera, initialize the camera and delete all setting information such as network settings and

administrator account.

For camera initialization, refer to Settings Page (P. 80). When disposing the camera, set [Network Settings] to [Do not save].

If unable to access the Settings Page, use the RESET switch on the camera to restore to the factory default settings.

Encrypting Backup Information

The backup information of the camera settings is used when restoring the camera to the user's previously saved settings. It

is possible to manage the backup information more securely by setting [Encryption Password] for the backup information.

Handle the set password with care.

Backup information encryption is set on the camera's Settings Page (P. 82).

Important

• [Video Distribution] under the [User Authority] (P. 71) is not reflected to the RTP.

• When using NDI|HX or RTMP, access control is disabled from the [User Management] (P. 70).

Содержание CR-N300
























































































































Результаты поиска

Содержание CR-N300

Отзывы:

Похожие инструкции для CR-N300

Бренды по названию

Популярные бренды

Canon CR-N300, Руководство по настройкам

Результаты поиска

Содержание CR-N300

Отзывы:

Похожие инструкции для CR-N300

Бренды по названию

Популярные бренды