Canon Color image RUNNER LBP5360, Руководство пользователя

Страница: 336 / 444

8-39
T
roub
leshooting
8
Message List
<37 CHK PPR TYPE> <Auto Error Skip>
Cause 1 An unavailable paper type is selected.
Remedy 1 The printer continues printing by pressing [Online]. However, printing is
continued with the paper type assumed to be plain paper. If the type of paper
loaded in the multi-purpose tray or paper cassette is not plain paper, you cannot
obtain appropriate printout results.
Remedy 2 Set the paper type to the appropriate one in TRAY PAPER TYPE (See p. 6-27)
or CASSETTE(n) TYPE (n = 1, 2) (See p. 6-29), then print again.
Cause 2 Color printing was performed on transparencies (Transparencies can be printed
only in black and white).
Remedy Set the color mode to "Black and White", then print in black and white.
<38 LOW IMGE QLTY> <Auto Error Skip>
Cause The printer cannot process the data because it is too complicated.
Remedy 1 The printer continues printing by pressing [Online]. In this case, the printer
prints with the image quality level being lowered.
Remedy 2 Perform a soft reset in the RESET menu, set GRADATION LEVEL (See p. 6-35)
in the QUALITY MENU options in the SETUP menu to HIGH 1, and then print
again.
Remedy 3 If you want to print without the image quality level being lowered, install an
optional expansion RAM module, and then print again. (See "Installing RAM,"
on p. 9-15)
<39 SPL MEM.FULL> <Auto Error Skip>
Cause Because spool memory has run out, the printer cannot print.
Remedy 1 The printer continues printing by pressing [Online]. However, the page with
which an error has occurred is not printed.
Remedy 2 Perform a soft reset in the RESET menu, specify the paper size smaller, and
then print again.
Remedy 3 Perform a soft reset in the RESET menu, set GRADATION LEVEL (See p. 6-35)
in the QUALITY MENU options in the SETUP menu to HIGH 1, and then print
again.
Remedy 4 If 2-SIDED PRINT. in the FEEDER MENU options in the SETUP menu is set to
ON, specify OFF, and then print again.