Canon Color image RUNNER LBP5360, Руководство пользователя

Страница: 335 / 444

8-38
T
roub
leshooting
8
Message List
Remedy 2 After turning the printer OFF, restore the memory to the original condition
(install the removed RAM), and then print again. (See "Installing RAM," on p.
9-15)
Remedy 3 Set EXT.RX BUFFER (See p. 6-51) in the INTERFACE MENU options in the
SETUP menu to OFF, and then print again.
<32 2-SIDED ERROR> <Auto Error Skip>
Cause The printer received 2-sided printing data of paper sizes (including the
orientation) or paper types unavailable for automatic 2-sided printing.
Remedy 1 The printer continues printing by pressing [Online]. However, the data on each
side is printed on two pages.
Remedy 2 After performing a soft reset in the RESET menu, change the setting to a paper
size or type available for automatic 2-sided printing, and then print again.
<33 WORK MEM.FULL> <Auto Error Skip>
Cause The work memory for each operation mode cannot be secured.
Remedy 1 The printer continues printing by pressing [Online]. However, the data with
which an error has occurred is not printed properly.
IMPORTANT
When you continue printing by pressing [Online], be aware that the data of macro that is
already registered may be deleted.
Remedy 2 Perform a soft reset in the RESET menu, increase the free space of RAM using
the following procedure, and then print again.
•
Perform a hard reset or cycle the power of the printer (Be aware that all the
data in the memory that the printer has received will be deleted).
•
If you are using UFR II Printer Driver, install an optional expansion RAM
module. However, the problem may not be solved even after the expansion
RAM module is installed. (See "Installing RAM," on p. 9-15)
<35 TABLE FULL> <Auto Error Skip>
Cause The number of the documents in a job has exceeded 16.
Remedy The printer continues printing by pressing [Online]. However, the job with which
an error has occurred is not printed.