5
5
5-7
5-7
Adjustment > Adjustment Method (ADF) > Adjusting the Height of the hinge > Check the height of the left hinge
Adjustment > Adjustment Method (ADF) > Adjusting the Height of the hinge > Check the height of the left hinge
Adjusting the Height of the hinge
■
Pre-check
Check whether the front and rear document glass spacers provided under the bottom of the
ADF are in close contact with the document glass when the ADF is closed.
■
Adjustment Procedure
(When the front or rear side is floating)
1) Adjust the left hinge height.
2) Adjust the right hinge height.
3) Adjust or check the left hinge height.
(When both sides are floating)
1) Adjust the left hinge height.
2) Adjust the right hinge height.
3) Adjust the left hinge height.
4) Adjust or check the right hinge height.
F-5-4
■
Check the height of the left hinge
1) Checking the rear-left height of the ADF.
Cut a sheet of A4 paper(use plain paper) to make a paper slip with width of 45mm.
Set paper against the protrusions of the stream reading glass in such a manner that the
seat of the stream reading glass is nearly hidden.
CAUTION:
Set paper so that it does not reach the document reader.
NOTE:
By placing the paper slip as instructed, it does not interfere the soundproofing sheet
stuck on the bottom of the ADF when closing it.
Protrusions
Sheet
Document reader
Paper
Protrusions
Document reader
Sheet
2) Pulling out the set paper
Pull out the paper in the direction of the arrow to check that you feel slight resistance.
F-5-5
F-5-6
Содержание Color Image Reader-F1
Страница 4: ...Blank Page ...
Страница 12: ...2 2 Technology Technology Basic Configuration Reader Controls Basic Configuration ADF Controls ADF ...
Страница 72: ...5 5 Adjustment Adjustment Adjustment Reader Overview ADF Adjustment Method ADF ...
Страница 101: ...Appendix Service Tools General Circuit Diagram ...