EN
Installing the Machine
Installing the Software
Next, configuring Fax Settings
(WG7450Z/WG7450F) P.15
• The procedures described here are for Windows.
For more details on the software installation
procedure, see the driver's manual.
• If connecting by USB, do not connect until
instructions to do so appear on the installation
screen. If you did, disconnect the USB cable from
the computer, close the dialog box, and then
perform the following procedure from step 1.
• Drivers for macOS are not bundled with your
machine. The latest drivers can be downloaded
from the Canon website.
1
2
If the screen is not displayed properly,
re-insert the DVD-ROM or search for "D:\
MInst.exe" on the Windows platform (This
description assumes that "D:" is the DVD-
ROM drive name).
After exiting the Setup Guide, continue by
making settings to connect the network and a
remote monitoring service. Items to set depend
on the connection and service usage. Check
settings that apply to the following conditions.
If Using a Fixed IP Address
Proceed to “Connecting to a Network with a
Fixed IP Address ( P.28)”.
If Using a Remote Monitoring Service
What is a remote monitoring service
A service that monitors the condition of the
machine and allows you to benefit from
different services such as recovery support.
Proceed to “Connecting to a Remote Monitoring
Service ( P.39)”.
Other
You are not required to make settings in the
following instances.
Proceed to “Installing the Software ( P.14)”.
• Obtain an IP address automatically with DHCP.
• Since only a USB connection will be used, an IP
address is not set.
• A remote monitoring service will not be used.
Network & Remote Monitoring
Service Connection Settings
14