Canon AX-C4343W Скачать руководство пользователя страница 14

Страница: 14 / 86

Safety information

CAUTION

Handling

• Do not place excessive weight on the product.

Do not use the detector in a manner that will subject it to local loads
of 100 kg or more.

If the load exceeds the limit, the inner device may be damaged.

• Do not touch the electrode terminals of the detector and the battery

pack.

• Handle the product carefully as it is precision device.

The inner device may be damaged if something hits against it, or if it is

dropped, or receives a strong jolt.

• Be sure to use the detector on a flat surface while using it in

horizontal position.

If the detector is set on a diagonal and pressure is applied to it, the inner

device may be damaged.

• Be sure to securely hold the detector while using it in upright

positions.

Otherwise, the detector may fall over, resulting in injury to the user or the

object, or may flip over, resulting in damage to the inner device.

Prohibited

000_DIA-2019-019-E03_AX-C4343W.book Page 14 Friday, November 27, 2020 12:38 PM

Содержание AX-C4343W























































































Результаты поиска

Содержание AX-C4343W

Отзывы:

Похожие инструкции для AX-C4343W

Бренды по названию

Популярные бренды

Canon AX-C4343W, Техническая документация

Результаты поиска

Содержание AX-C4343W

Отзывы:

Похожие инструкции для AX-C4343W

Бренды по названию

Популярные бренды