Canon AX-C4343W Скачать руководство пользователя страница 10

Страница: 10 / 86

Safety information

When a problem occurs

• Should any of the following occur, immediately turn OFF the power to

the product, unplug the power cord from the AC outlet, and contact
your sales representative:

– When there is smoke, an odd smell or abnormal sound

– When liquid has been spilled into the product or a metal object has entered

through an opening

– When the product has been dropped and is damaged

Inspection, disinfection, and cleaning

• Do not use flammable solvents to clean the surface of the product.

When the product is going to be cleaned, be sure to turn OFF the power to

the product, remove the battery pack, and unplug the power cord from the

AC outlet. Never use alcohol, benzine, thinner or any other flammable

solvents. Otherwise, it could result in fire.

• Clean the plug of the power cord periodically by unplugging it from

the AC outlet and removing dust or dirt from the plug, its periphery
and AC outlet with a dry cloth.

If the cord is kept plugged in for a long time in a dusty, humid or sooty place,

dust around the plug will attract moisture, and this could cause insulation

failure that could result in a fire.

• For safety reasons, be sure to turn OFF the power to the product

when the inspections of the product and cables are going to be
performed.

Otherwise, electric shocks may occur.

• The product must be repaired by a qualified engineer only.

If it is not repaired properly, it could result in fire, electric shock, or accident.

WARNING

Prohibited

000_DIA-2019-019-E03_AX-C4343W.book Page 10 Friday, November 27, 2020 12:38 PM

Содержание AX-C4343W























































































Результаты поиска

Содержание AX-C4343W

Отзывы:

Похожие инструкции для AX-C4343W

Бренды по названию

Популярные бренды

Canon AX-C4343W, Техническая документация

Результаты поиска

Содержание AX-C4343W

Отзывы:

Похожие инструкции для AX-C4343W

Бренды по названию

Популярные бренды