Canon AX-B3543W Скачать руководство пользователя страница 8

Страница: 8 / 60

Safety information

Follow these safeguards and properly use the device to prevent injury and damage to any
device/data.

1.1

Safety precautions

WARNING

Operating/storage environment

• Do not use or store the device near flammable chemicals such as

alcohol, thinner, benzine, etc.

If chemicals are spilled or evaporate, it could result in fire or electric shock

through contact with electric parts inside the device. Also, some

disinfectants are flammable. Be sure to take care when using them.

• Do not connect the device with anything other than specified.

Doing so could result in fire or electric shock.

Handling

• Never disassemble or modify the device.

Doing so could result in fire or electric shock.

• Do not place anything on top of the device.

The object may fall and cause an injury. Also, if metal objects such as

needles or clips fall into the device, or if liquid is spilled, it could result in fire

or electric shock.

• Do not hit or drop the device.

The device may be damaged if it receives a strong jolt, which could result in

fire or electric shock if the device is used without being repaired.

• Always confirm that there is no problem with the system during use. If

a problem occurs, take appropriate measures, such as shutting down
the system.

Prohibited

000_DIA-2019-001-E04_AX-B3543W.book Page 8 Friday, November 27, 2020 12:25 PM

Содержание AX-B3543W





























































Результаты поиска

Содержание AX-B3543W

Отзывы:

Похожие инструкции для AX-B3543W

Бренды по названию

Популярные бренды

Canon AX-B3543W, Техническая документация

Результаты поиска

Содержание AX-B3543W

Отзывы:

Похожие инструкции для AX-B3543W

Бренды по названию

Популярные бренды