Canon AX-B3543W, Техническая документация

Страница: 27 / 60

3
Parts names and functions
27
The ready indicator is connected to the image-capture computer via USB and is attached
using the hook-and-loop fastener in a place where it can be easily seen.
The LED lamps on the detector light up when the detector is in exposure ready status.
As the available image-capturing time (maximum 10 minutes) after the detector is changed
to exposure ready status, is reduced to 5 minutes remaining, 1 minute remaining and 10
seconds remaining, or when the X-rays are received by the detector, the detector beeps,
or the LED lamps on the detector light up or flash. The volume can be controlled or set to
mute.
This unit is used as an interface of the image-capture computer for infrared
communication with the detector, which registers the detector to the laptop computer.
3.3 Ready indicator
Do not install the ready indicator such a position that its IR data port faces the monitor,
reflector, or other IR data communication equipment, except for the detector.
A Mute switch Slide to to enable the mute function, and to to
disable the mute function.
B LED status indicator Lights up or flashes to indicate detector status, detector
registration, and connection status.
C IR data port Communication port for the detector link (registration/
connection)
D Volume button Click to turn up the volume, and to turn down the
volume.
E Speaker A beeping sound is emitted from the speaker openings.
F Micro USB connector Connector for the micro USB cable (Micro B type)
G Micro USB cable Connect to the image-capture computer.
Important
B
C
D
A
E
F
G
000_DIA-2019-001-E04_AX-B3543W.book Page 27 Friday, November 27, 2020 12:25 PM