Canon AX-B3543W, Техническая документация

Страница: 32 / 60

4
Operating procedures
32
( : Lighted up, : Flashing (1 sec. cycles), : Off)
* Exposure is not possible when the remaining battery level is 0% to 4%, as indicated by flashing.
1
Turn on the detector.
Press and hold the POWER switch
(for at least 0.5 seconds).
Power LED lights up.
When inserting the battery cover, make sure it does not have a bulge in the
middle. If there is a bulge, water resistance will deteriorate. Check the shape of
the battery cover, and if the inside of the cover has warped into a curved shape,
replace it with a new battery cover.
Make sure that the battery cover is inserted fully.
Make sure that the battery cover is locked securely.
The remaining battery pack charge is indicated by the Power LED lamps of the
detector when the detector is turned on.
Power
LED
Remaining
battery
charge
76% to 100% 51% to 75% 26% to 50% 5% to 25% 0% to 4%*
Important
Information
Information
Information
4.2 Operating the detector
POWER switch
READY LED
Power LED
000_DIA-2019-001-E04_AX-B3543W.book Page 32 Friday, November 27, 2020 12:25 PM