Canon AX-B3543W, Техническая документация

Страница: 24 / 60

3
Parts names and functions
24
The detector is designed to capture radiographic images.
3.1 Detector
A POWER switch When the detector is off, press the POWER switch
(for at least 0.5 seconds) to turn on the detector.
When the detector is on, press and hold the
POWER switch (for at least 3 seconds) to turn off the
detector, or press and hold the POWER switch (for
1 second or less) to establish the communication
link.
B Speaker
C Power LED Lights up when the detector turns on. Shows the
remaining battery pack charge.
D READY switch
E READY LED This LED lamp flashes while the detector is
transitioning to exposure ready status, and lights
up when the detector enters exposure ready
status. Also flashes (approx. 3 seconds) when
detector linkage is initiated. Flashes in the case of
errors.
F Error code display If errors occur, an error code is displayed.
G IR data port Communication port for the detector link
(registration/connection)
A
F
B
C
D
E
G
K
I J
H
L
000_DIA-2019-001-E04_AX-B3543W.book Page 24 Friday, November 27, 2020 12:25 PM