![background image](http://html.mh-extra.com/html/canon/ag1/ag1_service-manual_62249018.webp)
2
2
2-9
2-9
Technology > Controls > Overview > Non-stop Registration Control
Technology > Controls > Overview > Non-stop Registration Control
■
Paper Detection Control
Paper is detected by the Cassette Size Switch, Cassette Paper Surface Sensor and Cassette
Paper Sensor.
The absence of paper is notified when the Cassette Paper Sensor is turned ON at the time
the Cassette Size Switch is turned ON (it is detected that the Cassette is in the host machine)
and the Cassette Paper Surface Sensor is turned OFF (the Lifter Plate is raised to the pickup
position).
Lifting Plate
Detection Lever
Paper Detection Lever
Lifting Plate
Lifter Gear
Paper Level
Detection Lever
Cassette
Lifter Motor
Cassette Paper
Level Sensor
Cassette Paper
Surface Sensor
Cassette
Paper Sensor
■
Lifter Control
●
When Cassette is set
When the cassette is set, the Cassette Lifter Motor rotates to raise the Lifter Plate so that the
paper is raised to the position to be picked up.
F-2-12
■
Registration Control
It is a control to align paper and image on the ITB at a specified timing.
Based on the leading edge detection by the Pre-Registration Sensor (PS04), the following 2
controls are used:
• Non-stop registration control
• Stop registration control
Basically, the non-stop registration control is used.
However, if paper passes the Pre-registration Sensor (PS04) earlier than a specified timing,
stop registration control is executed to align paper and image on the ITB at the specified
timing.
Meanwhile, if the paper passes the Pre-registration Sensor (PS04) significantly later than a
specified timing, paper and image on the ITB cannot be aligned at the specified timing, and
therefore jam is generated. (Jam code: 0A90)
Sensor ON
(early)
Sensor ON
(late)
Jam occurs
Paper feed
Sensor
detection
timing
Non-stop Registration Control
Decelerated
Accelerated
Stop Registration
Control
Sensor ON
(ideal)
■
Non-stop Registration Control
It is a control to align paper and image on the ITB at a specified timing by increasing or
decreasing the paper feed speed.
Since paper is not stopped at the registration position, paper interval can be shortened and
productivity can be improved.
F-2-13
Содержание AG1
