Troubleshooting
54
“Error No.: X300”
Printer not ready
If the POWER lamp is off, turn the printer on.
If the POWER lamp is flashing green, the printer is initializing. Wait until the
POWER lamp stops flashing.
Printer not properly
connected
Ensure that the printer is securely connected to the computer.
Printer not selected
in Chooser
1. From the Apple menu, select Chooser.
2. Click the i560 icon and ensure that the i560 is selected as the target
connection.
If not, select it.
Problem
Possible Cause
Try This
Note
If you are using switching hub or other device, disconnect
the printer and reconnect it directly to the computer and try
printing again.
If successful, the problem may have been with the device.
There could also be a problem with the cable(s). Replace the
cable(s) and try printing again.
Note
If the problem persists, delete all unnecessary documents
from the Extensions and Control Panels folder.
i560_QSG_US.book Page 54 Tuesday, May 6, 2003 1:43 PM