1
2
3
4
5
6
5-4
Faxing Problems (MF3240 Only)
■
Sending Problems
Cannot send a fax.
Q
Is the machine overheated?
A
Unplug the machine and let it cool for about 5
minutes. Then plug in the machine and try sending
again.
Q
Did you just connect the power cord to the
machine?
A
Wait for a while. After connecting the power cord,
the machine cannot scan documents immediately.
Q
Is the machine set for the correct telephone line
type?
A
Make sure the machine is set for the correct
telephone line type. (See “Set the Telephone Line
Type,” in the Starter Guide.)
Q
Is your machine in fax mode?
A
Press [FAX] to show fax standby display.
Q
Is the document loaded correctly?
A
Make sure the document is correctly loaded. (See
Chapter 2, “Document Handling,” in the Basic
Guide.)
A
Make sure the front cover is fully closed.
Q
Is the one-touch speed dialing key or coded
dialing code you entered registered correctly?
A
Check that the speed dialing settings are
registered correctly. (See Chapter 4, “Sending
Faxes (MF3240 Only),” in the Basic Guide.)