4
5
130459.PDF
4
Rear Shock
Set-Up
1. Set the air pressure according to for you body weight.
Follow the shock manufacturer’s instruction for
pressurizing the shock.
2. Slide the O-ring against the shock wiper seal.
3. Sit on the bike in a normal riding position with your
hands on the handlebar and feet on the pedals so that
your weight compresses the rear shock.
4. Measure the SAG. Adjust the air pressure in the shock to
achieve the correct SAG measurement.
Add air to decrease sag.
Release air to increase sag.
Recommended sag 25% - 10mm
WARNING
SELECT ONLY COMPATIBLE SHOCKS AND FORKS
FOR YOUR BIKE. DO NOT MODIFY YOUR BIKE IN
ANY WAY TO MOUNT ONE. HAVE YOUR SHOCK
OR FORK INSTALLED BY A PROFESSIONAL BIKE
MECHANIC
• Riding with the wrong rear shock can damage the
frame. You could have a serious accident. Make
sure the total travel, eye-to-eye length, and stroke
length of the rear shock you select meet the
SPECIFICATIONS
listed in this manual.
• When selecting different shocks or forks for your
bike, make sure that the shock or fork you select is
compatible with your bike’s design and how you will
use your bike.
FRONT SHOCK BUSHING WIDTH
22.2 ± 0.05 mm
REAR SHOCK BUSHING WIDTH
22.2 ± 0.05 mm
SHOCK MOUNTING BOLT HOLE DIA.
8.1 ± 0.05 mm
10mm
SHOCK BOLTS
12 Nm, 106 In Lbs
Loctite™ 242 (blue)
SHOCK LINK
REAR
SHOC
K
WIPER SEAL
SHOCK LINK PIVOT
5 Nm,44 In Lbs
Loctite™ 242 (blue)
O-RING
PIVOT AXLE BOLT
5 Nm,44 In Lbs
Loctite™ 242 (blue)
SAG
130459_RUSH29_OMS_LAYERED_071813.indd 4
31.07.13 14:02