21
Technical Information
Manual Bearing Reset
(A)
2
5
4
1
3
Manual Bearing Reset
Perform the following procedure with the front
wheel on the fl oor.
1. Slide the travel indicator O-ring (1) against the
wiper seal (2).
2. Remove the valve cap (3) and attach a
suspension pump to the valve (4). Record the
air pressure, then release all the air with the
pump bleed valve.
NOTE: Due to the small air chamber volume,
the suspension pump may read 15-35psi
lower than the original fi ll pressure. Original
fi ll pressure, travel, and ramp ring
confi guration will infl uence this eff ect.
3. Hold the shock pump bleed valve open and
fully compress the Lefty by pushing down on
the handlebars.
4. Firmly bottom out the Lefty several times.
5. Measure the glossy stanchion tube (5) below
the travel indicator o-ring (1). Repeat step 4
until that measurement matches the
stanchion length that corresponds to your
Lefty in the table below.
Travel
Wheel Size
(A) Reset Length
+/- 3 mm
110
29”
4 mm
120
29”
4 mm
6. Set the air pressure recommended for your
riding weight or original recorded air
pressure.. See “Air Pressure.”
7. Remove the shock pump;return the valve
cap.
Содержание Lefty Ocho 120
Страница 29: ......
