background image

© 2020  

|

  Johnson Outdoors Marine Electronics, Inc.  

|

  cannondownriggers.com      

23

TERMINATING THE DOWNRIGGER LINE

l.  Turn the Terminator so that back side is facing 

toward you. The opening to the Bottom Hook 
should be on the left. With the Terminator in  
this orientation, place the freshly trimmed Line 
into the hole furthest to the right along the top 
hole so that the Line passes from the back of the 
Terminator through the hole to the front of  
the Terminator.

m.  When the Cannon Terminator is turned over facing 

forward, the Line should follow the Track along the 
left side of the Terminator to the Bottom Hook. The 
Line should then be pulled to exit out the bottom 
along the closed side of the Bottom Hook. Pull 
about 6 inches of Line from the bottom of  
the Terminator.

n.  With the Line exiting the bottom of the  

Terminator, slide the Line along the Bottom Hook 
so that is passes through the loop of the Snap 
Swivel linked on the Bottom Hook.

o.  With the Line through the loop on the Snap Swivel, 

pass it along the Bottom Hook of the Terminator 
and insert it into the hole in the space at the far 
end of the Terminator where the Bottom Hook is 
detached from its base. Pull about 6 inches of the 
Line through the hole. 

6

NOTICE: 

When routing the Line through the  

Terminator, there may be areas where there is slack in 
the Line. While routing the Line, it is okay for slack to 
be present. At the end of the termination process, the 
slack will be pulled tight. Be sure that the slack in the 
Line does not get kinked, to keep the Line easy to feed 
through the Terminator.

Cannon 

Cannon 

Terminator

Terminator

Cannon 

Cannon 

Terminator

Terminator

Bottom 

Bottom 

Hook 

Hook 

Opening

Opening

Bottom Hook 

Bottom Hook 

Opening

Opening

Cannon 

Cannon 

Terminator

Terminator

Cannon 

Cannon 

Terminator

Terminator

Bottom Hook

Bottom Hook

Bottom Hook

Bottom Hook

Line

Line

Line

Line

Line

Line

Snap Swivel

Snap Swivel

Snap Swivel

Snap Swivel

Back

Back

Front

Front

Front

Front

Front

Front

6l

6m

Line

Line

Line

Line

Track

Track

6n

6o

Bottom 

Bottom 

Hook 

Hook 

Opening

Opening

Содержание MAGNUM 5







































































Отзывы: