Cannon Latitude, Инструкция по эксплуатации

Страница: 19 / 38

Use soapy water or petroleum jelly around all seals.
length of flue exceeds 3 meters a condensate
drainage line will need to be fitted to the condensate
trap and taken to a suitable discharge point as shown in
FIG 21 and 22 .
. If the total
condensate drain.
Removal of Outer Glass Assembly
For shipment the outer glass is retained by two screws and washers. These are located at the sides of the
glass assembly near the top of the opening. These are removed during installation.
1. Removing the outer fascia
Remove two
retaining screws
3. Swinging to
lower edge
outwards
2. Lifting the glass
assembly upwards
Excess cable must be neatly stored away from
heater. (DO NOT rest cable on top of heater)