Cannon Fitzroy Inbuilt Скачать руководство пользователя

Страница: 1 / 14

Cannon

FITZROY INBUILT

USER INSTRUCTIONS

INSTALLATION INSTRUCTIONS

SERVICE INSTRUCTIONS

Gmk10025

AS4553:2008

This heater is approved for use with

Please leave instructions with the owner

Part No: F2903
Revision K - 2010

Cannon

For service to this appliance or spare
parts contact the CANNON distributor:

email: [email protected]

Sampford IXL (spare parts)

Phone: 1300 727 421
Fax:

1300 727 425

Data label

FITZROY INBUILT

Natural and Propane gases.

Attach copy of data label here!

PLEASE READ THIS MANUAL

BEFORE INSTALLING AND

USING THIS HEATER.

DON’T RISK YOUR APPLIANCE WARRANTY

ONLY A LICENSED PERSON WILL GIVE YOU A COMPIANCE
CERTIFICATE, SHOWING THAT THE WORK COMPLIES WITH
ALL THE RELEVANT STANDARDS.

AND ONLY A LICENSED PERSON WILL HAVE INSURANCE
PROTECTING THEIR WORKMANSHIP FOR 6 YEARS.

SO MAKE SURE YOU USE A LICENSED PERSON TO INSTALL
THIS APPLIANCE AND ASK FOR YOUR COMPLIANCE
CERTIFICATE TO ENSURE THE MANUFACTURERS
APPLIANCE WARRANTY WILL BE HONOURED.

Date installed: ...............................................................................................

Compliance Certificate No .............................................................................

Installed by: ...................................................................................................

INSTALLATION NOTES

Содержание Fitzroy Inbuilt















Результаты поиска

Содержание Fitzroy Inbuilt

Отзывы:

Похожие инструкции для Fitzroy Inbuilt

Бренды по названию

Популярные бренды

Cannon Fitzroy Inbuilt, Руководство по установке

Результаты поиска

Содержание Fitzroy Inbuilt

Отзывы:

Похожие инструкции для Fitzroy Inbuilt

Бренды по названию

Популярные бренды