Cannon DIGI-TROLL 10, Руководство пользователя

Страница: 27 / 40

27
www.cannondownriggers.com
Networking your Digi-Trolls
Up to six Digi-Troll series downriggers can be networked together. The units can either be network together with
the optional transducer or networked together with the Cannonlink accessory. To network your downriggers you
will need the Relay Cable Accessory (019634) between each downrigger you would like to link. To link using the
transducer, install and hook up tranducer as described in the Transducer Cable Routing section. Once the trans-
ducer is hooked up to the first downrigger, install the Relay Cable Accessory from the initial downrigger Data Out
connector on the back of the downrigger to the Data In connector on the next downrigger. Repeat for all connected
downrigger. To network the downriggers using Cannonlink, the Cannonlink cable will install to the Data In connec-
tor on the first downrigger. Connect all other downriggers by connecting the Relay Cable Accessory from the Data
Out to the Data In of the next downrigger. A terminator is needed on the last downrigger Data Out in order for the
downriggers to properly communicate. This terminator is included in the Cannonlink accessory.
Optional Intellitroll Accessory
The Digi-Troll series is compatible with the Cannon Intellitroll Speed and Temp sensor. The Intellitroll sensor gives
the user the speed, temperature, and depth at the weight. With the Digi-Troll 10, this information is displayed on
the built in LCD display. The Digi-Troll 10 will automatically recognize the Intellitroll when the Intellitroll is powered
DATA OUT
DATA IN
CIRCUIT BREAKER
POWER CABLE
FIGURE 30
DISPLAYED INTELLITROLL DATA
Getting Started
FIGURE 31