Cannon DIGI-TROLL 10, Руководство пользователя

Страница: 20 / 40

20
www.cannondownriggers.com
Digi-Troll 10 Display
When the power cord is plugged in, press the power button on the keypad to turn on the downrigger. In normal us-
age, the display will indicate the depth of the weight in feet.
(Note: A negative depth indicates distance above the water surface) .
During programming of special features, the display is used to indicate various settings.
Digi-troll 10 Keypad
The Digi-troll 10's key pad has eight keys located below the display.
Power
The ON/OFF key functions:
1) Turn the Digi-troll ON - Simply press and release.
2) Turn the Digi-troll OFF - Press and hold power button for three seconds.
MENU
The Menu moves the display through up to eight
screens for programming (see section on program-
ming for details). After 7 seconds of inactivity on the
key pad, the screen reverts back to the weight line out
display.
UP
During manual operation, this key raises the
weight when pressed. In programming mode, the
UP key increases numeric values.
DOWN
During manual operation, this key lowers the
weight when pressed. In programming mode, the
DOWN key decreases numeric values.
WATER ZERO
The water zero key provides a reset option for
depth. When pressed and held, the line out count
will reset to zero.
MENU
The menu key provides access to all program-
ming submenus.
RUN
This key is typically used to execute a function
after selected using the menu system.
SELECT
Use the Select key to set or display the pre-
programmed weight depths when in the Depth
screen. To move the weight to any of the depths
indicated, press the RUN key. Another function of
the Select is to step through sub-menus when you
are setting certain programmable parameters.
AUTO UP
Press AUTO UP to raise the weight to the water
zero set point at any time. AUTO UP uses the
speed 5 regardless of your setting and cancels
any other mode of operation (bottom following,
cycling, etc.) when used.
Getting Started