OVERALL DIMENSIONS OF THE HEATER CABINET
(SEE FIG 3 AND 4. )
FITMENT OF SPACER BRACKETS AND BLANKET
735mm
FIG 4.
FIG 3.
Page 5.
Page 4.
* HEIGHT
620 mm
(Including spacers)
* WIDTH
735 mm
(Including spacers)
* DEPTH
330 mm
(Including spacers)
* DEPTH
(When flue spigot engaged)
425 mm
620 mm
330mm
425mm
FIXING SCREWS
No8 x 3/8" SELF TAPPING
5
6
3
mm
T
O
ENT
R
E
L
IN
E
C
TOP & SIDE
BRACKETS
FIG 5.
FLUE SPIGOT
INSULATION
BLANKET
100mm
CLEARANCE
DIAGONAL
CORNERS
DIAGONAL
CORNERS
SECURE INSULATION BLANKET TO TOP OF HEATER
USING BLANKET RETAINERS. SCREW TO HEATER
TOP PANEL
REAR BRACKETS
BLANKET
RETAINER
BRACKETS
FROM COMBUSTIBLES
25mm
FLUE SPIGOT
SUPPORT BRACKET
FLUE SPIGOT
MTG BRKT
FLUE OUTLET
WHEN FLUE
SPIGOT
ENGAGED
1. Fit top and side brackets to heater cabinet on diagonal corners
as shown each side. (see Fig 5). Use existing screw positions.
2. Fit rear spacer brackets to heater cabinet on diagonal corners
as shown (see Fig 5). Use existing screw positions.
3. Position insulation blanket on heater top aligned with edges.
Secure with existing screws as shown (see Fig 5).
