CONTENTS
ITEM PAGE.
Page 9.
Pag
General
e 1
P
Mock fireplace enclosure recommendations
age 2
Mock cavity dimensions - Canterbury
age 3
P
Overall dimensions of heater cabinet Page 4
Fitment of spacer brackets and blanket Page 5
Installation into wall cavity -
MOCKKITRA
Method A Page 6 & 7
P
Installation into combustible cavity -
MOCKKITRO
Method B
age 8 & 9
INSTALLATION ADVICE OR TECHNICAL ISSUES
SAMPFORD IXL
ON
PH: 1300 727 421
or
FAX: 1300 727 425
CONTACT:
INSTALLATION INTO A COMBUSTIBLE ENCLOSURE
MOCKKITRO ( SINGLE SKIN FLUE )
METHOD B
METHOD.
125
25 MIN FROM
COMBUSTIBLES
FLUE
SPIGOT
FLUE SPIGOT
MOUNTING
BRACKET
SUPPORT
BRACKETS
100mm
FLUE
562 T
O C
L
TO SUIT FLUE SYSTEM
AND ENCLOSURE
TO SUIT FLUE SYSTEM
AND ENCLOSURE DEPTH
DEPTH OF
HEATER 300
1. Mark out vertical centre-line of flue outlet on rear of enclosure.
2. Mark out horizontal centre-line of heater flue outlet on rear of
enclosure utilise support brackets to support flue spigot mounting
bracket.
3. Measure distance required to engage flue outlet to flue spigot
once installed. Tighten adjustment screws as required.
