Cannon Tools NEILSEN CT2594, Инструкции и сборка

Страница: 4 / 12

2
1. SPECIFICATION
Model: CT2594
Capacity: 50Tons
Working range: 0-1000mm
Ram stroke: 185mm
Air pressure: 110 -120PSI
Air inlet: 1/4" NPT
2. IMPORTANT SAFETY INFORMATION
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance, and cleaning procedures. Keep your invoice
with this manual. Write the invoice number on the inside of the front cover. Keep
this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY WARNINGS
1. Keep work area clean and dry. Cluttered, dark or wet work areas invite injuries.
2. Keep children and bystanders away from work area. Do not allow children or
untrained individuals to handle this product.
3. Store idle equipment. When not in use, tools and equipment should be stored
in a dry location to inhibit rust. Always lock up tools and equipment and keep out
of reach of children.
4. Do not use a power tool while tired or under the influence of drugs, alcohol,
or medication. A moment of inattention while operating power tools may result in
serious personal injury. Read warning labels on prescriptions to determine if your
judgment or reflexes are impaired while taking drugs. If there is any doubt, do not
use this product.
5. Dress with safety in mind. Wear ANSI approved safety impact eyeglasses and
heavy-duty work gloves when using this product. Non-skid footwear or safety
Shoes should be used when working with this product. Do not wear loose clothing
or jewelry as they can become caught in moving parts. Wear a protective hair
Covering to prevent long hair from becoming caught in moving parts.
6. Do not overreach. Keep proper footing and balance at all times. Proper footing
and balance enable better control in unexpected situations.
7. Stay alert. Watch what you are doing at all times. Use common sense. Do not
use this product when you are tired or distracted from the job at hand.
8. Check for misalignment or binding of moving parts, breakage of parts, and any
other condition that may affect the tool’s operation. If damaged, have the tool
serviced before using. Many accidents are caused by poorly maintained tools.
9. Maintain this product with care. Keep this tool clean and dry for better and safer
performance.
10. Maintenance: For your safety, service and maintenance should be performed