Enter 65 End
*/$%ENTR* *ZEND*
Establish a Bluetooth Connection
5
5-2-6.
Bluetooth Dongle A302 Connection Mode
Bluetooth Dongle A302 is a specialized Bluetooth peripheral device adapted for use of
CM-2D600 via HID interface in attempt to leverage Bluetooth technology. An optional
purchase of Bluetooth dongle A302 could prevent you from going through the
complicated configuration since it is well programmed beforehand with all the necessary
Bluetooth settings before the delivery. Accordingly, performing Bluetooth operations out
of CM-2D600 for the very first time simply demands a press of button to recover the
Bluetooth connection which is earlier configured unless the scanner is re-programmed to
pair with third-party dongle or other Bluetooth devices. In case that you possibly adopt a
different approach to establish a Bluetooth connection for whatever reasons, the
step-by-step instruction is still provided so that you are able to make CM-2D600 work
with Bluetooth dongle A302 again.
Work with Dongle A302 for the First Time Use
Step
1
Secure the Bluetooth dongle A302 into Host PC.
Step
2
Scan the sequence of barcodes listed below to
switch the scanner to Bluetooth operation
mode.
Step
3
Press down either Scan Button or Small Trigger
to recover Bluetooth connection. A solid blue
LED indicates a successful attempt.
*/$%ENTR*
ENTER
/$%ENTR
*ZTOB*
To BT Mode
ZTOB
