Enter 205 End
*/$%ENTR* *ZEND*
Configuring Symbology
8
8-6-3.
Configure Concatenation Mode
Barcode Concatenation will automatically concatenate two adjacent codes which meet the
certain rules. By default the scanner will initiate symbol concatenation when the start digit of
second
barcode equals to the stop digit of first barcode, and then transmit the concatenated
message with the start/stop digits omitted. In contrast,
No Restriction
will compulsorily
concatenate adjoining codes, regardless of the values of the start and stop digits. Scan the
appropriate label to specify the condition under which symbol concatenation will be
performed.
8-6-4.
Enable/Disable Concatenation
This parameter allows you to enable or disable barcode concatenation feature. The
Concatenation
setting will simply transmit the concatenated codes in compliance with
concatenation rules, yet not sending out the single code. Scan
Both
label when you wish the
device to transmit not only the single barcode but also the concatenated data.
8-6-5.
Enable/Disable CLSI Library System
This parameter is to rearrange the scanned CodaBar code by adding a space after 1
st
, 5
th
, and
10
th
character of the barcode in compliance with standards of CLSI library system. Scan
appropriate barcode to determine whether or not to initiate the function.
*405B1*
2nd start = 1st stop
405B1
*405B0*
No Restriction
405B0
*405A1*
Concatenation
405A1
*405A0*
Disable
405A0
*405A2*
Both
405A2
