17
amount of water flowing out of the drain pipe. This is the residual water when the
factory performance is tested.
In the process of washing or rinsing, water
inflow sometimes occurs. This is due
to the automatic replenishment of the water level.
Washing machine setup When the rinsing program is started, no water is
injected. The default rinsing program for the washing machine starts with drainage
and dehydration.
After the dehydration starts, the dehydration barrel stops when it is time, which is
the intermittent dehydration set to achieve the dehydration effect.
In the middle of dehydration, water rinsing phenomenon sometimes occurs
because the balance of the clothes is automatically corrected when the clothes are
dehydrated.
Delayed dehydration after the water is finished. This is the default setting of the
washing machine.
The
button operation is invalid during the laundry process. This is the default
setting of the washing machine. It needs to be paused before it can be operated.
1. Common default and solution
：
Problem Display
Cause
Solution
Totally no
working
No display
The power plug is not plugged
in and the power switch is not
pressed.
Plug in the power plug and press
the power switch.
No display
The outlet has no electricity or
the fuse is broken.
Ask an electrician to check the
socket or fuse.
No display
The power outage causes the
program to disappear and the
operator must operate it again
after the call.
Turn on the machine after power on
and operate various buttons as
required.