Candy CATL 6108 GVSI, Инструкция по эксплуатации, Страница: 15 / 21

15
2) Press the "Wash", "Rinse" and "Spin", "Water level" and "Preset" function buttons to set the
appropriate washing time, rinsing times, spinning time, appropriate water level and appropriate
appointment time, and whether there is "water retention" function.
3) Press the “Start/Pause” button to boot the system.
4) Close the top cover and the washing machine enters the running state.
3. "Water retention" operation method
1) After turning on the power, the default setting of the machine is no water retention function,
and the "water retention" indicator is off. If you want to start this function, you can press the
"Rinse" button from the program operation to the last drainage to make the "water retention" light
on. If it is not necessary, you can press the "Rinse" button again to turn off the "water retention"
light.
2) After selecting the water retaining function, when the program runs to the last drainage, the
"water retention" light flashes, and an alarm is given every five minutes to prompt the user to
contain water. When the user is ready to receive the water container, press the "Rinse" button,
and the "water retention" light is off to start drainage. In this drainage process, press the "Rinse"
button to switch between drainage and stop drainage.
3) If the user does not press the "Rinse" button when draining the water for the last time, the "
water retention" light will be flashing all the time, and an alarm will be given every five minutes to
prompt the user to deal with the problem. The next step will not continue until the "Rinse" button
is pressed.
4. "Preset" operation method
1) After turning on the power, the user wants to start the preset program. After setting the
program, water level, process and other options, the user can press the "preset" button to select
the required preset time, and then press the "start" button to start the program. After the "preset"
is activated, the digital display shows the remaining time of the preset (in hours), and the "." light
flashes and lights up.
2) After "preset" is started, other buttons are invalid except "ON/OFF" button.
3) After "preset" is started, please close the upper cover of washing machine, otherwise the
program will pause and alarm.
4) After the "Preset" is started, if you want to change the running program or cancel the preset,
you need to cut off the power supply and reset.
MAINTENANCE
1. Clean the filter.