manualshive.com logo in svg

Candy CATL 6108 GVSI, Инструкция по эксплуатации, Страница: 16 / 21

Поделиться
Скачать
Candy CATL 6108 GVSI Скачать руководство пользователя страница 16

 

16 

 

Pull the filter out by 
pressing and holding 
the hook.

 

Remove the filter 

from the filter 

cover. 

 

Turn the filter bag 

from inside out, 

and wash in water 

to remove the lint. 

 

Reinstall the 

filter

 

 

2. Clean the inlet valve filter.

 

 The inlet valve filter is easy to be blocked by impurities and hinders water intake. 

Please clean it regularly (usually about 2 months). 

                                                                             

3. The whole machine is clean. 

  Clean the surface of the washing machine and the water in the barrel with a 

clean soft cloth. Open the cover for a period of time (about 1 hour) and air dry. 

Close the cover again. 

 Do not spray water directly on the washing machine, or use a 

thinner, detergent, 

kerosene, volatile oil, alcohol, etc. 

Specially dirty places can be wiped with a soft cloth dampened with mild soapy 

water. 

 

TROUBLE SHOOTING                                                                                                                 

1. Common non-fault phenomenon

 

 When the washing machine is used for the first time, there may be a small 

Содержание CATL 6108 GVSI






















Отзывы:

Нет отзывов