10
b.
According to the diagram, the water inlet is aligned with the tap and the nut
on the water inlet is tightened.
2) Connection between water inlet and Washing machine
a. Before
connecting,
please
check whether the
sealing gasket in the water inlet nut
has fallen
off or not.
b. Put water inlet nut on inlet valve joint.
c. Tighten the water inlet nut.
4. Connection of the drain hose (some model drains have been installed
before leaving the factory)
1.
Press down the fix ring,
and hitch it over the drain
hose.
2.
Press down the fix ring,
and then push it to the
drain outlet. Clasping the
fix ring to make sure they
are connected well.
3.
Draw the drain hose to the
outlet. Do not let the height
of the drain hose exceed
90cm from the bottom of
the machine.
Sealing gasket
Gasket
Inlet valve joint
Nut