Candy A 9002, Инструкция по установке и эксплуатации

Страница: 10 / 16

Some models are provided with an indicator
light which signals salt consumption. The signal
will appear according to one of two systems:
–
–
Other models are provided with a blind cap. In
this case, the salt level must be checked
periodically according to the water softener
system adjustment indicated in the table on
page 57.
Important: the appearance of white stains on
dishes is generally an important sign that the
salt container needs filling.
58
Water softener adjustment
(for levels 3 and 5)
If the water in your area is at levels 3 or 5,
proceed as follows:
- remove the lower basket, unscrew and remo-
ve the cap of the salt container on the
bottom of the tub;
- rotate the setting two positions from the
– position to the + position with the help
of a screwdriver or knife blade.
Machine adjustment
(for levels 4 and 5)
If the water in your area is at level 4 or 5,
proceed as follows:
- remove the top basket
- cut off the small plastic cap protuding from the
vent on the right side of the tub.
Warning: Use salt regularly from level 2
upwards, as instructed in the following
paragraph.
Salt loading indicator
an electric light on the control panel which
lights up when it is necessary to reload the
salt container;
the salt container cap with a green mobile
light which remains visible as long as there
is enough salt for regeneration purposes.
When the green surface is depressed inside
the cap, more salt must be loaded.
Loading the salt
The dishwasher is fitted with a softener which
clears the water of lime which could cause
scale and damage the dishwasher.
On the bottom of the machine there is a contai-
ner for the salt for regenerating the softener.
The filter medium of the softening plant must
be reactivated with dishwasher water softener
regenerating salt.
Other types of salt contain small quantities of
insoluble particles which over a long period of
time may affect and deteriorate the softener
performance.
In order to introduce the salt, unscrew the tap
of the container, on the bottom and then refill
the container.
During this operation a little water will overflow; continue in any case to introduce the salt
until the container is filled. When the container is filled, clean the thread of salt residue
and retighten the tap.
If it is not necessary to carry out washing immediately, insert programme Prewash so
that the salt solution which has overflowed is discharged from the washing tank.
Salt capacity of the container is from 1.5 to 1.8 Kg. and for efficient dishwasher
functioning the container must be filled periodically according to the water softener
system adjustement indicated in the table on page 57.
Important: it is necessary to add water until the container overflows. Only install the
dishwasher after completely filling the salt container.
59
This dishwasher offers you a wide range of wash programmes so
that you can choose the most suitable one according to what type
of dishes you have to get clean and on how dirty they are.
Refer to the PROGRAMME LIST to choose the most suitable
programme.
Useful hints
In order to avoid any dripping from the top rack, remove the lower
rack first.
If the dishes are to be left in the machine for some time, leave the
door ajar, so as to let some air circulate and to improve the drying
performance.
Selecting the programme