C&H Technologies EM405-8 Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 50

background image

28

will  assert  the  hardware  reset  line  for  the  associated  m-module.    Writing  ‘0’  will  return  the
module back to normal operation.

Fan  Control  &  Temperature  Status  (0x0A):    A  read  of  this  register  will  return  a  value
representative  of  the  temperature  inside  the  EM405-8  around  the  fan  area  and  will  return  the
current  setting  of  the  fan  control  bit.    The  temperature  field  of  this  register  is  read  only.    By
writing  to  the  fan  control  bit,  the  user  can  select  whether  the  fan  is  set  to  full-on  or  variable
speed.

Temperature Status (0x0C & 0x0E):  A read of these registers will return a value representative
of  the  temperature  inside  the  EM405-8  around  the  control  logic  and  M-Module  area,
respectively. The registers are read only.

M-Module Trigger A Control (0x10 to 0x1F):  (-0001 version only) These registers control the
direction, conditioning, source type, and source of the M-Module Trigger A signals.

M-Module Trigger B Control (0x20 to 0x2F): (-0001 version only) These registers control the
direction, conditioning, source type, and source of the M-Module Trigger A signals.

LVDS  Trigger  Control  (0x30  to  0x3F):    (-0001  version  only)  These  registers  control  the
direction, conditioning, output mode, source type and source of the LVDS triggers.

External  Input  TTL  Trigger  Control  (0x50):    (-0001  version  only)  This  register  controls  the
threshold level, impedance and source type of the input TTL trigger.

External  Output  TTL  Trigger  Control  (0x52):    (-0001  version  only)  This  register  controls  the
source of the output TTL trigger.

Edge  Clock  Source  Control  (0x58  &  0x5A):    (-0001  version  only)  These  registers  control  the
source of the Edge Clocks. The Edge Clocks are used for edge sensitive triggering.

C&H Technologies, Inc. <> 445 Round Rock West Drive <> Round Rock, Texas 78681 <> www.chtech.com

«
...
32
33
34
35
36
...
»

Содержание EM405-8



















































Отзывы:

Нет отзывов

Похожие инструкции для EM405-8

Univerge SV8100

Бренд: NEC Страницы: 44

Бренд: D-Link Страницы: 100

Бренд: D-Link Страницы: 134

Бренд: D-Link Страницы: 187

Бренд: D-Link Страницы: 225

Бренд: D-Link Страницы: 31

Бренд: D-Link Страницы: 35

DES-1016D - Switch

Бренд: D-Link Страницы: 19

Бренд: D-Link Страницы: 107

AirPlusXtremeG DI-624

Бренд: D-Link Страницы: 5

Бренд: D-Link Страницы: 48

Бренд: CAME Страницы: 19

Бренд: Nayar Systems Страницы: 37

Бренд: Icidu Страницы: 10

Бренд: Conceptronic Страницы: 230

OCTOPUS 5TX-EEC

Бренд: Hirschmann Страницы: 6

PBE-5AC-300-ISO

Бренд: Ubiquiti Страницы: 28

SmartNode 4520 Series

Бренд: Patton electronics Страницы: 90

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды