C&H Technologies EM405-8 Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 50

background image

15

Figure 9. Web LAN Configuration Page

4.4.1

TCP/IP Mode

The EM405-8 must have a unique IP address before it can communicate on a network.  There are
several options for assigning an IP address to the unit.  The option to choose is dependant upon
the type of network for which the EM405-8 is being configured.

DHCP:  The Dynamic Host Control Protocol (DHCP) allows the module to dynamically retrieve
an  IP  address  from  a  DHCP  server  at  power-up.    If  DHCP  is  used,  the  EM405-8  may  have  a
different  IP  address  assigned  each  time  it  is  powered  on  or  connected  to  the  network.    DHCP
requires that another device on the network is acting as a DHCP server.  Otherwise DHCP will
fail and the IP address of the EM405-8 will not be properly configured.

Auto IP: Auto IP utilizes the Dynamic Link-Local Addressing protocol to acquire an IP address.
When performing Auto IP configuration, the device selects an IP address from a defined range of
169.254.0.0 to 168.254.255.255.  It then performs an Address Resolution Protocol (ARP) query
to determine if the selected IP address is being used by any other devices on the network.  If it is
free then the devices uses this IP address.  If it is in use, the device selects another address from
the  range.    It  repeats  this  process  until  an  unused  IP  address  is  found.    Auto  IP  is  useful  on
networks in which dynamic configuration is required yet a DHCP server does not exist.

C&H Technologies, Inc. <> 445 Round Rock West Drive <> Round Rock, Texas 78681 <> www.chtech.com

«
...
19
20
21
22
23
...
»

Содержание EM405-8



















































Отзывы:

Нет отзывов

Похожие инструкции для EM405-8

SMART NODE 4950-NCE

Бренд: Patton electronics Страницы: 8

NetLink 2960 RAS

Бренд: Patton electronics Страницы: 2

Бренд: Patton electronics Страницы: 2

Бренд: Qlogic Страницы: 20

Бренд: Tripp Lite Страницы: 2

Ethernet Communication Module DVPEN01-SL

Бренд: Delta Electronics Страницы: 54

Бренд: TRENDnet Страницы: 2

Бренд: US Robotics Страницы: 156

Бренд: ZyXEL Communications Страницы: 2

Бренд: NETGEAR Страницы: 2

Бренд: IMC Networks Страницы: 36

Бренд: Uniflair Страницы: 24

Бренд: National Instruments Страницы: 56

Бренд: XtendLan Страницы: 21

Бренд: Ariesys Страницы: 10

Бренд: Softing Страницы: 16

Бренд: Comtrend Corporation Страницы: 4

Бренд: Linksys Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды