CANchecked VADpro VAD15, Руководство пользователя

Страница: 27 / 31

Rev 1.0
27
In addition, you now also have the remove and copy buttons to choose from with which you can
delete and copy can addresses and sensors. This function is especially handy when creating your own
TRI files .
Please note that the pages point to the sensor location, so if you delete sensors , you will most likely
need to readjust your pages
8.2.3 Setup of analog inputs via DSS
The analog inputs can be set up both via the DSS and via the o DSS ( chapter 6.1.7).
If your TRI file does not yet have a sensor for an analog input , you can add it to your TRI file by
selecting the corresponding AIN(s), scrolling down and pressing A pply . Now you must activate the
enhanced mode in the upper right corner. You can change the name, adjust the attenuation, choose
the type of mapper and of course activate the
analog input .
Figure 32: Adding AINs
The mapper can be set to three different options:
•
OFF (shows the 10bit ADC value: 0-1023)
•
MAP
•
NTC
Figure 33: MAP
Figure 34: NTC
If set to OFF , no characteristic curve is activated and a value of 0-1023 is output.