Rev 1.0
11
Once you have successfully connected your MFD15 Gen2 via USB, you will need the
CANcheckedUpdater and the appropriate .flash file, both of which can be found here:
https://www.canchecked.de/downloads/downloads-mfd15-mfa20-gen2/
In addition, the appropriate driver is also offered on the website. To update the display wired, you
need to run the updater and make sure that your MFD15 Gen2 is recognized as shown in the
following picture.
Figure 8: CancheckedUpdater
Now you can use the "Select Firmware" button to load the .flash file that you previously downloaded
from the website into the updater. After the updater has checked the file, the previously greyed out
"Start Update" button becomes visible, and the update is started by clicking on the button. You can
follow the progress in the loading bar of the updater. After a successful update, your display reboots.
